Customer Journey Tracking Metrics: Path Length, Days to Purchase, and Touchpoints per Order
Customer journey tracking comes down to four measurements taken from your own orders: path length, days from first touch to purchase, touchpoints per order, and the split between the channels that open journeys and the ones that close them. Each one maps to a decision you already make, from how long your lookback window should be to when to expect results from a new campaign. There are no universal benchmarks worth borrowing. This post defines each metric, shows where to find it in AdBeacon, and explains what to do with the result.
What do path length, days to purchase, and touchpoints per order measure?
Each metric describes a different dimension of the same journey, so define them once and keep the definitions fixed. These are the working definitions used in this post, with the AdBeacon report where each one lives:
The number of touches between a customer's first captured touch and the order. In the Optimize dashboard, path length is reported for campaigns, ad sets, and ads.
Optimize dashboardThe time from the first captured touch to the order. The Customer Journey report includes a time-to-convert summary.
Customer Journey reportThe number of distinct channels or campaigns involved in the order. Two clicks from the same email flow is a long path but only one touchpoint source. The Customer Journey report shows every touchpoint for every order.
Customer Journey reportWhich channels appear first in journeys and which appear last.
Customer Journey reportThree clicks from one email flow
Three different channels
To open the Customer Journey report, click the shopping cart icon in the Optimize dashboard. It shows every touchpoint for every order, plus the time-to-convert summary and the products purchased. The Orders report lists every purchased order, so you can verify any journey against your store. Write the definitions on the first tab of your analysis sheet so you know why a trend moved. Cross-device identity is a separate problem, covered in our post on fragmented customer journeys.
Two limits are worth knowing. AdBeacon reports a Direct bucket only in total, with no breakdown by landing page, URL, or device, so direct journeys cannot be split further. And attribution starts from the moment of setup, so orders from before then, although backfilled from your store, will not have journeys.
How do you measure customer journey metrics from your own data?
Start in the Optimize dashboard and the Customer Journey report, then pull the order-level detail into a spreadsheet to calculate each metric per order and summarize the distribution. The method:
- Read path length in Optimize. Compare path length across campaigns, ad sets, and ads.
- Open the Customer Journey report. Use the cart icon to see every touchpoint for every order.
- Check the Product report. The small box at the far right of the Optimize report is the Product report, which lists every product purchased for that campaign, ad set, or ad. Look at whether long journeys cluster around higher-priced products.
- Export for deeper math. AdBeacon for Google Sheets can pull essentially any data in AdBeacon into a sheet, where you can compute medians and percentiles.
- Summarize with medians and percentiles, not averages. A handful of slow, long journeys drags an average away from what most customers do. Use the median, a high percentile, and the share of orders at 1, 2, and 3 or more touches.
- Segment and flag. Split by new versus returning customers, by product or price tier, and by first-touch channel. Flag sale periods, because promotions compress journeys.
If signal capture is patchy, path lengths will look shorter than reality. Check quality first, using the approach in our post on first-party data signal quality.
How do you use days to purchase to set a lookback window?
Set the window to cover the bulk of your real purchase timeline, which you read from the cumulative distribution of days to purchase. Plot what share of orders has occurred by day 1, 3, 7, 14, 30, and so on, then pick the day by which most orders are in, using a cutoff you choose and record (for example, the day by which 80 percent of orders have happened).
The curve is illustrative; plot your own from order-level data. Where it crosses your cutoff is your window.
Then compare that to what the platforms assume:
- Meta's current default for website conversions is 7-day click, with 1-day engage-through and 1-day view-through.
- Google Ads defaults to 30 days for click-through on Search and Display, and lets you set 1 to 90 days depending on the source.
- In Google Analytics 4, other key events default to a 90-day lookback, with 30 and 60 as alternatives.
If most of your customers buy within a few days, a short window is fine. If a large share buy two or three weeks after first touch, a 7-day window undercounts prospecting channels and flatters whichever channel closes. Longer windows weaken the link between a touch and the order. Use the longer window for budget decisions and the shorter one for in-platform optimization, and log which one each report uses.
What do first-touch and last-touch channel mix tell you?
Comparing the two shows which channels create demand and which collect it. Pull the first and last touchpoint from each order in the Customer Journey report, then put the two channel mixes side by side as percentages of orders:
- Higher on first touch than last touch: the channel opens journeys. Judging it only on last-click results undervalues it.
- Higher on last touch than first touch: the channel closes journeys, often retargeting, branded search, or email. It may depend on other channels to fill the pipeline.
- Similar on both: the channel tends to handle the whole journey, which usually means short paths.
Bar lengths show the pattern, not real data.
Pair this with path length. A channel that opens long paths needs more patience in reporting than one that mostly appears in single-touch orders. For a refresher on how the credit rules differ, see our guide to attribution models.
How should journey metrics change your budget timing?
They tell you how long to wait before judging spend and how early to start before a sale. Three applications:
- Judge results after the lag, not before. If your median journey is two weeks, last week's prospecting spend has not finished producing orders. Reading its ROAS now will understate it. In AdBeacon you can set the date range to any window, with or without comparison to the previous period, which is useful around launches.
- Time pre-sale spend to your journey. If the typical customer needs a couple of weeks between first touch and purchase, prospecting for a promotion needs to start at least that far ahead.
- Set test lengths to match. A creative or audience test that runs shorter than your typical journey will mostly measure the customers who were already close to buying.
The marketing efficiency ratio is a useful cross-check while lagged data matures.
For a sense of what brands report after switching to AdBeacon, Poppy and Pine, an apparel and lifestyle brand working with Best Practice Media, saw Meta new-customer revenue grow 1,600% and revenue grow 60% in a 90-day comparison, according to its AdBeacon case study.
One brand's 90-day results with Best Practice Media, measured with AdBeacon. Results vary by account.
Four numbers from your own orders will tell you more about your customers than any industry benchmark: how many touches, how many days, how many channels, and who opens versus who closes. Calculate them once, segment them, and revisit quarterly or whenever your offer changes. To see your own journey data in the Customer Journey and Product reports, book a live AdBeacon demo.
FAQ
What is a good average customer journey length?
There is no universal figure, because journey length varies by product, price, and audience. Measure your own median days to purchase and touches per order, and segment by new versus returning customers.
How do I find days from first touch to purchase?
Open the Customer Journey report from the shopping cart icon in the Optimize dashboard and read the time-to-convert summary. For a distribution, export order-level data and summarize it with medians and percentiles instead of one average.
How long should my attribution lookback window be?
Long enough to cover most of your real purchases, which you find in the cumulative distribution of days to purchase. Record the cutoff you choose and revisit it when your offer or audience changes.
What is the difference between path length and touchpoints per order?
Path length counts touches before an order, while touchpoints per order counts the distinct channels or campaigns involved. A customer can click the same email flow three times, which is a longer path but still one touchpoint source.